per 15" x 24" sheet
Lead Time: 1-3 DAYS
  • Each sheet of pipe wrap is 15" wide, 24" long, 1/16" thick
  • Triple performance by doubling the layer
  • Ships same day from Georgia or Utah
  • Receive in 1-3 days, 2 days or less for 97% of our customers
  • Share

VibraDamp, our own specially designed damping pad is a versatile product. We have designed this product to dampen the vibrations transferring through any plastic or metal surface. It is most commonly used to wrap drain pipes and sheet metal duct, but can adhere to any smooth lightweight surface to reduce, and often eliminate, sound transfer through the material. Other applications include vehicle interiors, machinery, furnaces, and appliances.

The black side of the VibraDamp is a self stick butyl that will easily to attach to pipes, duct, and other clean smooth surfaces without additional fasteners. The opposite side is a reflective aluminum constrained layer with a finish consistent with sheet metal.

Each sheet is sized at 15” x 24" covering a total of 2.67 square feet per piece.

For drain pipe coverage, estimate 2 linear feet per sheet for 4 inch drain pipes and 2.5 linear feet for 3” drain pipes. Calculate the circumference of the drain pipe or round duct by multiplying the diameter by 3.14.

Remove the release paper from the VibraDamp and press the black butyl side against the surface. Avoid air bubbles or large wrinkles in the material by pressing firmly from one end to the other. Cut the VibraDamp with a razor into strips to fit around elbows, corners, and other tight areas.

VibraDamp Specs
Dimensions 15" x 24"
Thickness 1/16" or 1.7 mm
Weight 1.56 pounds per sheet
Solids By Weight 100%
Service Temperature -40°F to 300+°F (-40°C to 149°C)
Shelf Life One Year
VibraDamp Downloads
VibraDamp Product Specs Download PDF 55KB
VibraDamp MSDS Download PDF 510KB

VibraDamp is similar to mass loaded vinyl in weight, but with damping properties several times greater than both 1 LB and 2 LB MLV. While a single layer provides significant damping, a double layer of VibraDamp has been tested to show triple the damping. On a scale of 0 to 1, the damping rating of sheet metal is around .006. With VibraDamp installed against the sheet metal, the damping increases to .441. This is a gain of 7500%, similar to what Green Glue Compound accomplishes in a wall.

Based on feedback from several customers, a single layer of VibraDamp around a drain pipe is at least equal to the performance of cast iron (almost nearly isolated from all resonance). A double layer of VibraDamp around a drain pipe will achieve full isolation.